Service Check List

Service Check Category: Systems Checks Passive: No Description: This check is used to alert if the status for a module in an Arista device returns a status of nonoperational. It uses the Entity MIB (1.3.6.1.2.1.47.1.1.1.1.2) to get a list ...

Service Check Category: Network Application Checks Passive: No Description: This service check collects the list of NS records for the specified domain, and then checks the provided host name against each of them, making sure they are resp...

Service Check Category: System Checks Passive: No Description: Checks battery health and replacement status of APC units. Check returns CRITICAL if battery reports needing replacement, if battery is (selectively) on/off, or if battery repo...

Service Check Category: Web Checks Passive: No Description: Connects to the host to which it is applied using PowerShell (using the credentials configured for the device) and searches the certificate repository for all certificates that e...

Service Check Category: System Checks Passive: No Description: This check monitors the following environmental variables on Cisco devices for status: Voltage Status Temperature Status Fan Status Supply Status Unsupported Devices ...

Service Check Category: Network Connectivity Checks Passive: No Description: This SNMP-based service check is used to monitor the status of all members in a Cisco switch stack. The check enters a CRITICAL state if a stack member returns a...

Service Check Category: System Checks Passive: No Description: Monitors the state of individual members of an F5 Global Traffic Manager resource pool. Do not confuse with Check F5 LTM Pools.

Service Check Category: System Checks Passive: No Description: Monitors the state of individual members of an F5 Local Traffic Manager resource pool. Do not confuse with Check F5 GTM Pools.

Service Check Category : System Checks Passive : No Description : This service check monitors modules status on Cisco devices by querying the operating status of the various modules. Non-OK states in a module will cause the check to go C...

Service Check Category: Web Checks Passive: No Description: Checks the SSL certificate expiration date on the host to which the check is applied and compares it to the user configurable fields for WARNING and CRITICAL states. The check ent...

Service Check Category : System Checks Passive : No Description : Queries the hardware status of the PSU, memory and temperature probes. Check will enter WARNING or CRITICAL state depending on code returned from hardware. Best practice is to...

Service Check Category : Interface Checks Active/Passive : Active See also Service Check for a general explanation of service checks in Netreo. Description See also Monitoring Network Interfaces for additional information about monitoring...

See also Service Check Basic Information Service Check Category : Network Connectivity Checks   Passive : No Description This service check first checks Cisco's "rttMonCtrlAdminEntry" (OID 1.3.6.1.4.1.9.9.42.1.2.1.1.3) for tags that m...

Service Check Category: System Checks Passive: No Description: Checks to see if a Linux-based device has been “up” for a specified number of days. If it has, goes CRITICAL. Used to monitor devices that should be periodically rebooted.

Service Check Category: Web Checks Passive: No Description: Checks for a specified URL on the host device. Supports username and password authentication as well as content validation using regex strings.

Service Check Category: Network Application Checks Passive: No Description: Check that the host system is responding to SSH login requests.

Service Check Category: System Checks Passive: No Description: Checks an entire, but arbitrarily defined, OID tree for OK, WARNING and CRITICAL values.

Service Check Category: Network Application Checks Passive: No Description: Sends a specific, user-provided SQL query to a Microsoft SQL server and checks the response.

Service Check Category : Network Connectivity Checks Passive : No Description : Checks five optional IP addresses (including HOSTADDRESS$).

Service Check Category: Network Application Checks Passive: No Description: Checks the status of a running MySQL database using a supplied username and password. Connects directly to the SQL server on port 3306.

Service Check Category: Netreo Checks Passive: No Description: Checks the health of chassis items, storage controller(s), and physical and virtual disks of a Netreo physical appliance. If any items are in a critical or unhealthy state the ...

Service Check Category: Network Connectivity Checks Passive: No Description: Checks the Network Time Protocol synchronization status of the host.

Service Check Category : Network Connectivity Checks Passive : No Description : Sends a specific, user-provided SQL query to an Oracle server and compares the response the a user-supplied value. If the evaluation is "true," the check remains in...

Service Check Category: Firewall Checks Passive: No Description: This check monitors a Palo Alto firewall for active/standby HA status. If, when checked, the status of the firewall is determined to be different from the state specif...

Service Check Category: Firewall Checks Passive: No Description: This check monitors a Palo Alto firewall for active/standby HA status. If, when checked, the status of the firewall is determined to be different from the state specifie...

Service Check Category : System Checks Passive : No Description : Checks the Power over Ethernet status of interfaces and will go critical if an interface is not currently operating as a powered ethernet interface. “Searching”, “DeliveringPow...

Service Check Category: Firewall Checks Passive: No Description: This check monitors the status of a Check Point firewall in either active or standby mode that is a member of an HA cluster. If the firewall leaves the cluster and no longer ...

Service Check Category: Firewall Checks Passive: No Description: This check monitors the status of a Check Point firewall in active mode that is a member of an HA cluster. If the firewall changes to standby mode, or leaves the cluster, the...

Service Check Category: Firewall Checks Passive: No Description: This check monitors the status of a Check Point firewall in standby mode that is a member of an HA cluster. If the firewall changes to active mode, or leaves the cluster, the...

Service Check Category: Firewall Checks Passive: No Description: This check monitors the peak number of connections (since the last check) of a Check Point firewall and compares it against a "max connections" limit. If the current peak numb...

Object Type: Service Check Service Check Category: Firewall Checks Passive: No Description: This check monitors the peak number of connections (since the last check) of a Check Point firewall and compares it against a "max connections" l...

Service Check Category: Firewall Checks Passive: No Description: This check queries a Check Point firewall to validate that a current policy is installed and that any configured log servers are reachable. If either query returns a warning ...

Service Check Category: Firewall Checks Passive: No Description: This service check queries each Check Point virtual firewall instance on your network. Any response other than Active , Standby or N/A causes the check to enter the...

Service Check Category: Network Application Checks Passive: No Description: Runs a query via remote PowerShell that returns a string value. If this value contains multiple lines, all lines of the value are checked (in contrast to Check Powe...

Service Check Category: Network Application Checks Passive: No Description: Runs a query via remote PowerShell that returns a string value. If this value contains multiple lines, only the last line of the value is used by the check (in con...

Service Check Category: System Checks Passive: No Description: Linux servers only. Sends a specific, user-provided SSH command to the host and checks the output against either a numerical value or a regular expression. The check will enter ...

Service Check Category: System Checks Passive: No Description: Checks the host’s “HOST-RESOURCES-MIB” for a specific running process and goes CRITICAL if it is not found.

Service Check Category: Web Checks Passive: No Description: Checks the expiration date and status of the specified host's SSL certificate. Alerts on upcoming expiration or bad status. Check-specific Fields: (See the entry Service Chec...

Service Check Category: Web Checks Passive: NO See also Service Check Description This service check monitors the SSL certificate for a website. It will connect to the website from the Netreo appliance that is polling the managed device ...

Service Check Category: System Check Passive : No Description : An active check (use sparingly) to check the win32_service class for services that are in a “stopped” or “disabled” state. Useful for monitoring a server and validating that a se...

Service Check Category: Network Application Checks Passive: No Description: Checks to make sure that the host is responding on a user-specified TCP port.

Service Check Category: Network Application Checks Passive: No Description: Checks for power problems or blade failures and the states of different environmentals (such as voltage and temperature) on Cisco Unified Computing System hardware...

Service Check Category: Network Application Checks Passive: No Description: Checks to make sure that the host is responding on a user-specified UDP port and check the specific response.

Service Check Category: Web Checks Passive: No Description Queries a web page for either a match to a user-provided regular expression or a 200 HTTP response. To test for a regex pattern, enter a valid regular expression in the REGEX PAT...

Service Check Category: Web Checks Passive: No Description: Checks to make sure that the host is responding to HTTP requests.

Service Check Category: System Checks Passive: No Description: Checks to see if a specified process is running, and if its memory usage is larger than a specified amount. The name of the process is explicit, and must specify the full name...

Service Check Category: System Checks Passive: No Description: ( This service check does not work when applied directly to devices, it must be applied through a device template . ) This service check creates multiple passive checks to ...

Service Check Category: System Checks Passive: No Description: Checks the time on a remote Windows Server via WMI and compares it to the time of the Netreo server. Time difference offsets for WARNING and CRITICAL levels are customizable.

Service Check Category: System Checks Passive: No Description: Sends a specific user-provided WQL/WMI query to a Microsoft server and checks the response.

Service Check Category: System Checks Passive: No Description: Checks the “last modified time” of the specified file on a Windows server to determine if it has been modified within the last 24 hours (by default), or a specified arbitrary t...

Service Check Category : System Checks Passive : No Description : Checks to see if uptime is less than 5 minutes. Will go critical if it is. The purpose of this check is to notify when a reboot has happened, as sometimes a virtual guest will ...

Service Check Category: System Checks Passive: No Description: Look for a specific z/OS listener. If not found, check goes CRITICAL.

Service Check Category: System Checks Passive: No Description:   This SNMP-based service check is used to check if the running configuration of a Cisco device has changed since the last time it was written to the terminal. Netreo q...

Service Check Category: System Checks Passive: No Description:   This SNMP-based service check is used to monitor the status of Queue Availability in Cisco IronPort   Email Security Appliances  by querying the SNMP OI...

Service Check Category: System Checks Passive: No Description:   This SNMP based service check is used to monitor the status of resource conservation for Cisco IronPort  Email Security Appliances  by querying the SNMP O...

Service Check Category: Netreo Checks Passive: Yes Description: Although named "Configuration Manager Passive Check," t his is technically an authentication failure service check. It is a passive check added to every device by the “D...

Service Check Category: Netreo Checks Passive: Yes Description: Monitors whether or not the host is being polled for performance data. If Netreo is unable to collect performance data from the host (such as from failed credentials), thi...

Service Check Category: Network Application Checks Passive: No Description: Validate that this host responds to a DNS request for a specific hostname and returns the correct address.

Service Check Category: Network Application Checks Passive: No Description: Check to see if the domain provided is on any DNS-based spam block lists.

Service Check Category: System Checks Passive: No Description: Checks to make sure that remote commands can be executed on this host using the Nagios Remote Plugin Executor (NRPE) protocol.

Service Check Category: Generic Passive Service Checks Passive: Yes See also, Service Check Description The Generic Passive Check is used with the Netreo Alerting API . You can choose to add this service check to a managed device manual...

Service Check Category: Web Checks Passive: No Description: A simple GET request to the IP address of the managed device the check is assigned to. If the HTTP response code is anything other than what is defined in the check (200 by d...

Service Check Category: HP Insight Manager Agent Checks Passive: No Description:   This service check monitors the hardware status of a an HP iLO module (with an option to specify the IP address of the iLO card instead of&nbs...

Service Check Category: Cloud Check Passive: No Description: Monitors whether or not the host is being polled for performance data. If Netreo is unable to collect performance data from the host (such as from failed credentials), this c...

Service Check Category: Interface Checks Passive: No Description:   This check looks for Meraki WAN status based on the wan_length value returned   from the Meraki API  as an integer. Initially it checks the network_id...

Service Check Category: Network Application Checks Passive: No Description: Validates that this Microsoft SQL host is responding to login and standard queries on port 1433.

Service Check Category: System Checks Passive: No Description: This service check can be used to create alarms for database states. The alarm parameters are configurable so that you can choose which states to alarm on. The possible states...

Service Check Category : Network Connectivity Checks Passive Check : No Description : This service check queries if any of the OSPF neighbors of the device it is assigned to are not in a "Full" state, based on the states for OID 1.3.6.1.2.1.1...

Service Check Category: Network Connectivity Checks Passive: No Description: Verify an Internet Control Message Protocol version 6 (ICMPv6) response to a user-specified IPv6 address.

Service Check Category: Network Application Checks Passive: No Description: Checks for host connectivity using the Internet Control Message Protocol (ICMP). Used as the host availability check for most device types to monitor device up/do...

Service Check Category : Web Checks Passive : No Description : This check sends a POST request to an API endpoint. If the return value is anything other than the value supplied in the EXPECTED RESPONSE CODE field (defaults to 200) the check wil...

Service Check Category : Network Application Checks Passive : No Description : This check makes a REST API GET request to a specified API endpoint. If the response from the API does not match the response value configured in the check, the chec...

Service Check Category : Network Application Checks Passive : No Description : This check makes a REST API GET request to a specified API endpoint. If the status code in the response from the API does not match the status code value configured ...

Service Check Category : Web Checks Passive : No Description : This check sends a POST request to an API endpoint. If the return value is anything other than the value supplied in the EXPECTED RESPONSE CODE field (defaults to 200) the check wi...

Service Check Category: Netreo Checks Passive: No Description This service check is automatically added to a newly created service engine by Netreo's internal logic (that is, not through a device template or auto-configuration rules ) an...

Service Check Category : Generic Passive Checks Passive : Yes Description : This check enters a CRITICAL state if vCenter polling returns the target host’s connection state as “notResponding”. See the official VMware documentation for possi...